Shop
Insulating Mats
Insulating Mats:
High quality Insulating mats conforming to Standards IEC 61111 & AS/NZS IEC6111:2020
High quality rubber provides complete protection against electric shock due to earth faults
Suitable for applications and placed in front of electrical panels, switchgears and high voltage equipment for safe working environment for operators/users
Choice of Class must be determined according to the maximal nominal voltage of network
Zero Halogen
REACH, ROHS2 compliant
Anti-skid fabric impression/corrugation material
Link Boxes
Link boxes:
Link boxes are used with cable joints and terminations to provide easy access to shield breaks for test purposes and to limit voltage building up on the sheath. Lightning, fault currents and switching operations can cause over voltages on the cable sheath. The link box optimizes loss management in the cable shield on cables grounded from both sides.
Features :
- Compact design
- Stainless steel
- 1-phase and 3-phase boxes
- Sheath voltage limiters (SVL).
LV Surge Arrester
Features:
- No air gap therefore no internal ionization.
- Light weight compared to porcelain.
- Ease of installation.
- Non shattering housing.
- Optimized voltage stress grading eliminates need to oversize stress grading ring, therefore the compact series parallel can be installed in tight spaces without infringing electrical or surge safety clearances.
- The diameter of the series parallel design has been calculated to reduce the radial field stress to a minimum, even under adverse environmental conditions.
- Can directly be mounted on equipments.
LV Termination
L.V. Termination:
RRL’s cable terminations for up to 1 kV are acknowledged to be more reliable and quicker to install than other conventional systems. RRL makes a wide range of terminating systems and supports them with full customer service, installer training and technical assistance to meet the demands of the growing world of energy.
Features:
- Heat-shrink technology.
- Quick and easy installation.
- Solutions for all types of cable constructions
MV Surge Arrester
Features:
- Tested in accordance with IEEE 62.11, 2005
- Direct molded housing to prevent moisture ingress
- Low residual voltages
- High-energy handling
- Safe non-shattering short circuit behavior to higher current levels
- Maintenance free
- Hydrophobic silicone/ EVA housing: (Tracking and erosion resistant)
- Excellent cantilever and tensile performance
- Quality design and manufacturing meeting international standards
MVFT
Medium Voltage Fusion Tape (MVFT):
For cold applied applications Medium Voltage Fusion Tape is also available which performs the same function.
Features:
- Silicone self amalgamating fusion tape.
- A single layer of tape with two-third overlapped is suitable for 15kV AC voltage and dual layer for 35kV AC voltage.
- Wide operating temperature 0°C to 90°C.
- Design to combine the integrity of a Silicone polymer with the versatility of wraparound product.
- It sticks to itself and other insulating material, it will not adhere to metal porcelain allowing easy removal for maintenance.
Polymeric Insulator
Features:
Crimp technology
• Maximum mechanical strength without damaging the fibre glass rod
• Patented crimp
Composite design
• Lightweight - easy installation
• Vandal and break resistant
• Impact resistant
EVA housing
• High tracking and erosion resistance
• Excellent performance under polluted conditions
• Reduced maintenance costs
Direct bonding to end fitting
• Ideal moisture barrier, avoids moisture ingress to the fibre glass rod.
Shear Head Mechanical Connectors
Features:
- Wide application range.
- Compact design,
- Can be used with almost every type of conductor and material.
- Torque-controlled shear head bolts guarantee a good electrical contact.
- Easy installation with standard socket spanner.
- Pre-engineered design for perfect fit in medium voltage cable accessories up to 42 kV.
- Tested according to IEC 61238-1 class A
Switchgear Inner Cone Termination (RPIT)
Switchgear Inner Cone Termination (RPIT):
Raychem RPIT Plug-In Terminations for connections to switchgear and transformers with inner cone bushing size 2 (800 A) and 3 (1250 A). Available for system voltage upto 42 kV
Features:
- Conforms Size 2 & 3 bushing as per EN50180 / EN50181.
- Plug-in single as per core termination for Inner Cone bushing.
- Separable inline connection for high current, gas insulated switchgears upto 42KV.
Switchgear Inner Cone Termination RPIT
Switchgear Inner Cone Termination (RPIT):
Raychem RPIT Plug-In Terminations for connections to switchgear and transformers with inner cone bushing size 2 (800 A) and 3 (1250 A). Available for system voltage upto 42 kV
Features:
- Conforms Size 2 & 3 bushing as per EN50180 / EN50181.
- Plug-in single as per core termination for Inner Cone bushing.
- Separable inline connection for high current, gas insulated switchgears upto 42KV.
Switchgear Outer Cone Termination ELBC
Features:
- Confirm to Type “C” bushing as per EN50180 / EN50181
- Suitable for Type “C” bushing Voltage upto 33KV and Current upto 1250A
- The wide application range covers cable cross sections from 35 to 800 mm2.
- Conductor connection with mechanical lugs ensures perfect tightening unlike crimping.
- Easily accessible rear plug with capacitive test point.
- Screened Elbow Connector for Type “C” bushing.
- Built-in Trifurcation kit for Three Core version.
Switchgear Outer Cone Termination RSTI-1
Features:
- Confirm to Type “C” bushing as per EN50180 / EN50181.
- Suitable for Type “C” bushing voltage upto 33KV and Current upto 1250A.
- The wide application range covers cable cross sections from 35 to 800 mm2.
- Easily accessible rear plug with capacitive test point.
- Built in Trifurcating kit for 3 Core version.
- Conductor connection with mechanical lugs ensures perfect tightening unlike crimping.
- Screened Elbow Connector for Type “C” bushing.